Polaris Ranger Cabs & Tops

[SXSHQ]

This top is fabricated from 16 ga. steel. The sides are hemmed over and folded back on themselves (see pictures) for extra strength along the edges. The hemm makes a 1/8 inch thick frame around the outside of the top. In otherwords, this top will hold up to most tree branches hitting the top. The top is thick enough it will not vibrate like thinner ones on the market. The gasket and rubber coated mounting hardware will protect your rail cage from scratching and keep it looking new in case you want to remove it at a later time. The corners are weld and ground smooth.
Powder Coated Black Texture.
Includes: Mounting Hardware and instructions.
Corners are welded and ground smooth.
Ships as two pieces and bolts together at assembly (this was to prevent dammage during shipping).
Ships via ups.

Fits: 2005-2008 Polaris Ranger XP700, 500 4x4, 500 4x2, and 6x6.

2005-2008 Polaris Ranger Top $299

[SXSHQ]

Made from 16 ga steel and powder coated for superior protection. This products will keep things such as logs from falling into the passenger area. Punched holes allow for good visibility when backing up.

* Fits: 2009 Ranger only
* Protects Driver from Objects in cargo area
* 16 ga. steel
* Powder Coated- Texture Black

2009 Polaris Ranger Bulkhead $169.99

[SXSHQ]

2009-2011 Polaris Ranger Hard Top with LED Map Light $319

Fits: 2009-2011 Only

* 16 ga. Steel
* Powder Coated- Texture Black
* LED Map Light (no wiring)
* No drilling or Cutting (Bolts-On)
* Can be used with our windshield and CAB rear panel
* Made in the USA.

Made from 16 gauge steel. All four sides are hemmed back twice forming a 1/8" steel angle on all four sides making the top very tough and rattle free. Attaches with (6) of our "Quick Connect" clamps. Once, you install the clamps you can easily remove the top in a few minutes by removing (6) screws while the clamps remain on the ROPS.
The LED Map light will run for over 100 hours on the batteries that are supplied.
This top can be used with most windshields on the market including our Full Windshield (p/n 10279). Also, our CAB Rear Panel (p/n 10286) can be used with this Hard Top.
Ships VIA UPS to your door.

[SXSHQ]

2010 Polaris Ranger Crew Hardtop with LED Dome Lights $549

[SXSHQ]

Polaris Ranger 2010 400cc, 2011 500cc, & EV Ranger Hard Top $329





Fits: 2010 400cc, 2011 500cc & EV Ranger.

Made from 16 ga steel and powder coated gloss black to match the cage. The sides are folded over twice creating a 1/8" angle around the outside making it very it very durable. It mounts with EMP "Quick Connect Clamps" using (6) bolts so you can easily remove the top. The clamps will remain on the cage so you can easily mount it again. Will work with most windshields including the EMP Full Windshield.

* CNC Cut and formed.
* Powder Coated for superior protection.
* Includes: Mounting hardware and instructions.
* Ships via UPS to your door.
* LED dome light uses (3) AAA batteries that are included.

Polaris Ranger 2010 400cc, 2011 500cc, & EV Ranger Hard Top $329

[SXSHQ]

2010-2011 Ranger Cab Back with Windows $349

Fits:2010 Ranger 500, 800, and Crew.

2011 Ranger 800 and Crew (not 500).

Made from 16 ga. Steel and powder coated texture black to match the ROPS. Designed to fit the 2010 ROPS only ensures a very precise fit. The edges are hemmed back twice making a very smooth and strong sides. It attaches to your roll cage with our Quick Connect Clamps. It is pictures with our top and Glass windshield.


Laser Cut.

16 Ga. Steel

Powder Coated - Texture Black

Works with EMP Hard top.

Includes: Mounting hardware and instructions.

[SXSHQ]

2010-2011 Polaris Ranger Cab System $1195



Fits:

2010 Ranger 500 and 800 (not 400)

2011 Ranger 800 (not 500)

You will get following three items. Laminated safety glass windshield with a hand operated windshield wiper, Hard Top with LED dome light, and a cab back.

Windshield:

The windshield features laminated safety glass like you car has. This windshield will not scratch. The 16 ga. steel frame is powder coated with a texture black. All the edges are hemmed back on themselves making smooth strong sides. It attached to your ROPS with our quick connect windshield clamps so you can easily remove it. Simply, remove the six thumbscrews. It inlcudes a hand operated windshield wiper.

Hard Top:

This is the same hard top we have been selling for three years. It features 16 ga. steel construction. The corners are welded and ground smooth giving it a very clean look. All the edges are folded back on themselves twice making a 1/8" thick angle around all four sides. This makes the top very durable when rubbing against trees etc. The LED dome light will run up to 100 hours on the batteries provided. It attaches with our quick connect clamps. No drilling.

Cab Back:

The cab back is made from 16 ga. steel and powder coated to match. The edges are folded and hemmed to make strong smooth sides. The windows are made from scratch resistant polycarbonate.