Standard Mount Bumper
This front bumper is a great addition to any RZR. It mounts in the same places as the factory upgrade bumper and requires no modifications to the machine. It can be installed in less than 15 minutes. While not the ultimate in complete front end protection, this bumper has proven itself to very effectively protect the RZR from heavy brush and light front hits
FB2 Rigid Mount Front Bumper
The Ultimate in front end protection for your RZR or RZR S. This bumper fits all RZR models from 08'and up. This is the same bumper design as Racer Tech's FB1 standard mount bumper but the upper mounts have been reconfigured. The FB2 bumper is a 2-piece design which ties directly into the upper framework at the front of the chassis. The upper chassis stiffener installs first in the track of the stock sway bar (which most people remove anyways) There are four holes which will need to be drilled to attach the chassis stiffener to the dash bar. Once this piece is installed the rest is very simple. The lower mounts to the bottom of the chassis as usual and the upper mounts are two tubes which reach under the headlights and connect to the chassis stiffener. There is no cutting of the plastic required for installation and this bumper does allow for use of a winch. Bumper comes complete with powder coat and all needed installation hardware.
Racer Tech FB3 Front Bumper
Racer Tech's newest rigid mount front bumper offering for the Polaris RZR. The original FB2 has proven itself time and again to be the strongest bumper available on the market providing absolute radiator protection as well as serious front upper chassis reinforcement. While this design has become known as THE bumper to have if you are into any form of racing, we have received feedback that there are potential customers who want our bumpers but are not willing to delete the factory front sway bar on the standard RZR. The FB3 is Racer Tech's answer to the call. The FB3 is the same style bumper as our other offerings. The only difference is the way the upper mounts work. This bumper is a three piece design which is very easy to install and provides all the protection necessary for a large majority of drivers. This bumper will also provide absolute radiator protection but it does not require the customer to eliminate the factory front sway bar on the standard RZR. The RZR S does not use a front sway bar so both our rigid mount bumpers are a viable option for these machines.
All of our front bumpers come with the option to add a skid plate also.