Polaris Ranger Bumpers

[SXSHQ]

Polaris Ranger XP Front Winch Bumper 2009-2011 (http://sxsheadquarters.com/index.php?main_page=product_info&cPath=140_147&products_id=904)
Add function and style to the front end of your Ranger with the Heavy Duty Front Bumper. Mount your winch on top keeping it out of the mud and water. No more bending over to reach your winch cable. Designed in CAD, Laser Cut, and CNC Formed to insure a perfect fit.

http://sxsheadquarters.com/images/polaris_ranger_xp_front_bumper-5.JPG

* Replaces your Stock Front Bumper.
* Allows you to mount up to a 4000 lb winch on top.
* Laser Cut, CNC Formed, and Robotic Welded.
* All welds ground smooth.
* Made from 1/8 inch thick American Steel.
* Two Winch Mount Bolt Patterns (3" x 4.875" and 4" x 6").
* Texture Powder Coated for Superior Protection and Style.

If you would like to mount a winch and lights. You can use our Light Brackets P/N 10591 to mount them to the Stinger Bar.

Fits the following Vehicles:

1. 2009-2010 500 4x4
2. 2010-2011 Crew (four seater) does not fit the 2009
3. 2009-2011 XP800
4. Does not fit the Ranger 400

http://sxsheadquarters.com/images/polaris_ranger_xp_front_bumper-5_01.JPG

http://sxsheadquarters.com/images/polaris_ranger_xp_front_bumper-5_02.JPG

http://sxsheadquarters.com/images/polaris_ranger_xp_front_bumper-5_03.JPG

[SXSHQ]

2005-2011 Polaris Ranger Extreme Rear Bumper (http://sxsheadquarters.com/index.php?main_page=product_info&cPath=140_147&products_id=696)

http://sxsheadquarters.com/images/polaris_ranger_rear_bumper-1.JPG

2005-2011 Ranger Extreme Rear Bumper

(does not fit 2011 Ranger 500)

Fits: Ranger XP500, XP700, and XP800 and Crew Models.

Does not fit 400, we do have one that will.

* Bumper made from 11 ga American Steel.
* Mounting brackets made from .188 thick American steel.
* The ends are welded and ground smooth.
* Laser cut "EMP" logo.
* Includes: Mounting hardware and instructions.
* Mounts to the same location as factory bumpers.
* Powder Coated Texture Black for superior protection.

This Polaris Ranger Bumper is Laser Cut and formed from one piece of steel this bumper is very strong and will dress up the rear of your Ranger. The ends are welded and ground smooth. The finished bumper is powder coated with a mini-texture black. The mounting brackets are made from heavy gage steel.

http://sxsheadquarters.com/images/polaris_ranger_rear_bumper-1_01.JPG

http://sxsheadquarters.com/images/polaris_ranger_rear_bumper-1_02.JPG

[SXSHQ]

http://sxsheadquarters.com/images/polaris_ranger_rear_bumper-1_03.JPG

http://sxsheadquarters.com/images/polaris_ranger_rear_bumper-1_04.JPG

[SXSHQ]

Polaris Ranger Rear Tube Bumper - 05-11 Ranger 500, 700, 800 (http://sxsheadquarters.com/index.php?main_page=product_info&cPath=140_147&products_id=902)

http://sxsheadquarters.com/images/ranger-rear-tube-bumper-1.JPG

Add style and protection to your Ranger with the Tube Rear Bumper. It protects the rear and sides of your Ranger. The 1-1/2" O.D. tube wraps around the sides so that trees bump off the sides. The mounting brackets are laser cut from 3/16 inch thick American Steel. Mounts to your bed in minutes to the stock bumper mounting brackets that are located under your cargo bed.

*
Powder Coated Texture Black to match the roll cage.
*
1-1/2" x .083 Wall Tubing.
*
Laser Cut "EMP" LOGO.
*
Dumps with the cargo bed.
*
Will still dump with a trailer receiver inserted into the hitch (see the video).
*
Includes: all mounting hardware and instructions.
*
Made in Cleveland Ohio.

*Does not fit 2011 500

http://sxsheadquarters.com/images/ranger-rear-tube-bumper-1_01.JPG

http://sxsheadquarters.com/images/ranger-rear-tube-bumper-1_04.JPG